16 x 40" Heavy Duty Precision Gap Bed Lathe w/ DRO

16 x 40" Heavy Duty Precision Gap Bed Lathe w/ DRO

$13,850 (USD)

orCall 281-915-4382

Description

ISO 9001 certified Large spindle bore 2-1/16” Heavy Duty spindle D1-6 One-piece solid cast iron machine base Heavy Duty guideway width 10-1/4” Heavy Duty main motor 6 HP 16 spindle speeds from 45-1,800 rpm, speeds: 45/70/90/108/140/165/215/255/330/385/510/585/770/900/1170/1800rpm 45 kinds of inch threads, and 39 kinds of metric threads Threading and feeding rate change without changing gears Spindle is balanced, hardened and precision ground Spindle is supported at 3-point by high precision bearings All gears and shafts are hardened and precision ground Guideways induction hardened and precision ground Automatic lubrication system in headstock and feed box One year industrial warranty for parts
Show All

Specifications

ManufacturerGMC
ConditionNew
Max. swing over bed 16-1/16"
Max. length of workpiece 40"
Max. swing over cross slide 10-1/4"
Max. swing in gap 23-1/4"
Width of bed 10-1/4"
Effective length in gap to spindle 8-1/2"
Effective length in gap to chuck jaws 3-1/2"
Spindle bore 2-1/16" D1-6
Taper of spindle center M.T. #6 (MT6/MT4 sleeve)
Spindle speeds 45-1,800 rpm / 16 steps
Longitudinal feeds 0.0018-0.07 IPR, 42 kinds
Cross feeds 0.0009-0.03 IPR, 42 kinds
Inch threads 70-2 TPI, 45 kinds
Metric threads 0.2-14 mm , 39 kinds
Diametral pitch threads 8-40 DP , 21 kinds
Module threads 0.3-3.6 mm, 18 kinds
Max. travel of top slide 4-1/4"
Max. travel of cross slide 8-1/2"
Spindle length w/o chuck 20-1/2"
Leadscrew length x tpi 1-1/4" x 4 TPI
Diameter of tailstock quill 2-1/16"
Max. travel of tailstock quill 5"
Taper of tailstock quill center MT4
Main motor 6 HP, 3 Phase, 20AMP, Prewired: 220VAC
Note 30AMP Breaker Needed ( 20A x 1.5 )
Coolant pump 1/8 HP, 220V, 3 Phase
Oil for headstock / gear box / apron #30 weight machine oil, Eg: Texaco regal R&O 100, 3 Gal.
Net weight: 4,150 lbs.
Overall dimensions (lxwxh) 79" x 38" x 56"
Shipping dimensions 80”x36”x70”