20" x 80" Bed Gap Metal Lathe | 3-1/8" Bore | 2-Axis DRO
20" x 80" Bed Gap Metal Lathe | 3-1/8" Bore | 2-Axis DRO
$23,850 (USD)
orCall 281-915-4382
Description
Bed Gap Metal Lathe with a big spindle bore 3-1/8". Precise, robust, and fully equipped with a 29 swing in gap. Whether you're in a machine shop or looking to replace your old workhorse in your home garage, this metal lathe is for you. It comes standard with a fully assembled metal stand with two cabinets on each side to keep your tooling and accessories stored.
ISO 9001 certified
1-Year Parts Only Warranty
Large spindle bore 3-1/8”
Spindle D1-8
Guideway width 12”
Main motor 10HP
16 spindle speeds from 25-1,800 rpm, 12 speeds
4-way rapid traverse on the carriage longitudinal and cross
60 kinds of inch threads, and 41 kinds of metric threads
Threading and feeding rate change without changing gears
Spindle is balanced, hardened and precision ground
Spindle is supported at 3-point by high precision bearings
All gears and shafts are hardened and precision ground
Guideways induction hardened and precision ground
Automatic lubrication system in headstock and feed box
Specifications
Manufacturer | GMC |
Condition | New |
Max. swing over bed | 20" |
Max. length of workpiece | 80" |
Max. swing over cross slide | 12 1/2" |
Max. swing in gap | 29-1/8" |
Width of bed | 12" |
Effective length in gap to spindle | 6" |
Effective length in gap to chuck jaws | 3 1/2" |
Spindle bore | 3 1/8" | D1-8 |
Taper of spindle center | M.T. #7 |
Spindle speeds | 25-1,800 rpm / 12 steps |
Longitudinal feeds | 0.0011-0.063 IPR, 42 kinds |
Cross feeds | 0.0003-0.018 IPR, 42 kinds |
Inch threads | 2-112 TPI, 60 kinds |
Metric threads | 0.1-14 mm , 41 kinds |
Diametral pitch threads | 4-112DP , 50 kinds |
Module threads | 0.1-7mm, 34 kinds |
Max. travel of top slide | 5" |
Max. travel of cross slide | 11 1/4" |
Spindle length w/o chuck | 17-1/2" |
Leadscrew length x tpi | 1 1/4" x 4 TPI |
Diameter of tailstock quill | 2-3/8” |
Max. travel of tailstock quill | 5-1/8” |
Taper of tailstock quill center | MT4 |
Main motor | 10 HP 3 Ph., Prewired: 220VAC / 35A, Optional: 440VAC / 20A |
Coolant pump | 1/8 HP 3 Ph., Prewired: 220VAC, Optional: 440VAC |
Net weight | 6,350 lbs. |
Overall dimensions, lxwxh | 128" x 43" x 59" |